SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H ASSEMBLY APP AVAILABLE ON We highly recommend downloading the Absco Sheds Assembly App to assist with your build. Australian Made + Scan to download STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS 4” RETE CONC SLAB 122” 63.8” WALLS SIT ON THIS LEVEL When laying a concrete slab for your shed, it is best practise to have a rebated edge to prevent water ingress.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made GENERAL INSTRUCTIONS SAFETY NOTES • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Some parts may have sharp edges. It is advisable to wear gloves when handling these items and safety glasses if drilling holes. Sensible shoes are highly recommended.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made COMPONENT PACKING LIST Nominal sheet widths are shown +/- 0.08” is within tolerance Check off all components. QTY DESCRIPTION PART # CHK QTY DESCRIPTION PART # STEEL SHEET 2 STEEL SHEET 80.5” x 30.4” 262 1 72.9” TO MIDPOINT 2 STEEL SHEET 80.5” x 30.4” 263 1 72.9” TO MIDPOINT 260R 1 77.9” TO MIDPOINT 261L 4 STEEL SHEET 63.4” x 30.4” 43S 1 77.9” TO MIDPOINT 261R 2 STEEL SHEET 70.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H QTY DESCRIPTION PART # CHK QTY Australian Made DESCRIPTION PART # 1 CHANNEL 58.9” 55AL 1 CHANNEL 55AR 58.9” 1 CHANNEL 55CL 58.9” 1 CHANNEL 55CR 58.9” 1 CHANNEL 58.9” 55BL 1 CHANNEL 55BR 58.9” 1 CHANNEL 58.9” 81BL 1 CHANNEL 81BR 58.9” 2 CHANNEL 58.9” 81AL 2 CHANNEL 81AR 58.9” 2 CHANNEL 60.2” 61D 2 HINGED CHANNEL 67.9” 58A 2 CHANNEL 59.5” 81E 1 CHANNEL 67.9” 58B 1 CHANNEL 61.7” 79A 4 CHANNEL 30.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel. Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet. Each perimeter channel must finish flush with the edges of the sheets.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other = = = = CSJ = JOIN>> <> JOIN>> JO IN Step 2.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made PRE-ASSEMBLY OF SPLICED CHANNELS Join together 12x channel sections using 6x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them. = 2x 81A AL 81 .
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H COMPONENT OVERVIEW Australian Made 88J 81A 43S 43S 43S 43S 81A 88J 61D 261L 262 55B 263 260L 263 262 90A 55A 61D 34A 91A 81E 89A 261R 89A 260R B 91A 34A 22A A 81B 81E 79A 55C Absco Industries Assembly Instruction Manual Model: 30152SK-PTX 12/7/23 1.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H ed REAR PANEL ASSEMBLY ge ho les to ou Australian Made 1. Overlap specified sheets as shown. Make sure ends are flush. tsi de Where possible, have sheets orientated so printed part numbers are as shown. 262 263 263 Part numbers are found on the inside of the sheeting near the corner. ed 262 ge ho les to ou Shown as grey box on left tsi de START HERE 2.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made SIDE PANEL ASSEMBLY 1x LEFT SIDE PANEL 1x RIGHT SIDE PANEL 260R 261R 261L 260L 61D AP TE SN T i 81E A SN E P T iT 61D E APT iT SN E APT iT SN 81E Absco Industries Assembly Instruction Manual Model: 30152SK-PTX 12/7/23 1.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made ROOF PANEL ASSEMBLY 43S 43S 43S 43S 81A D SN 88J E APT iT 81A D E APT iT SN 88J Absco Industries Assembly Instruction Manual Model: 30152SK-PTX 12/7/23 1.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made 89A FRONT PANEL ASSEMBLY 89A 34A 34A SN E APT iT 55A SN 90A E APT iT SN 79A E APT iT 55C SN Absco Industries Assembly Instruction Manual E APT iT Model: 30152SK-PTX 12/7/23 1.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H DOOR PANEL ASSEMBLY Australian Made 58C SNAPT iTE D 58C SNAPT iTE D 58A D 58B D B 12A D D D A D 58C SNAPT iTE 58A SNAPT iTE Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. 89C 58C B A Long flange of channel Short flange of channel Four hole set for padbolt connection. Absco Industries Assembly Instruction Manual Model: 30152SK-PTX 12/7/23 1.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made DOOR PANEL ASSEMBLY 91A 91A B A Nuts and bolts may be used instead of pop rivets by drilling out hinge holes using a 4mm drill bit. Both are supplied. The two holes required to connect the padbolt hasp for each door have not been pre-punched, to 1/8” holes and allow for proper alignment, position each hasp centrally over the padbolt shaft and drill 3mm secure with screws.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not pre-punched. D D D D D D D D D D D D Side wall channels fit into the notched rear wall channels. Absco Industries Assembly Instruction Manual Model: 30152SK-PTX 12/7/23 1.
SPACE SAVER SHED MODEL: 30152SK-PTX 10” 10” 24” 24” 24” Australian Made 10” FINAL CONSTRUCTION 24” 10” 10’ W x 5’ D x 5‘11” H, 7‘ H D 10” 10” 14” 14” 14” D 10” D 14” 10” ANCHORING OF SHED Location of 15 concrete anchors D D D D D D D D D D D Bolt & Nut Steel Angle • EACH ANCHOR CONSISTS OF ONE NUT & BOLT, A DYNABOLT AND STEEL ANGLE. • DRILL A HOLE IN THE WALL SHEET TO SUIT BOLT. • DRILL A HOLE IN THE SLAB TO SUIT DYNABOLT.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made Absco Sheds Storage Guidelines • Absco Sheds are designed to be weatherproof for normal weather conditions. In the event of extreme weather conditions such as heavy rain, combined with high wind gusts, the ridge capping, sheeting joins, screw fixings etc., may exhibit minor deformations which may allow some water entry. These areas should be checked regularly to ensure that maximum strength and protection is maintained.
SPACE SAVER SHED MODEL: 30152SK-PTX 10’ W x 5’ D x 5‘11” H, 7‘ H Australian Made EXPORT PRODUCT WARRANTY AGAINST DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 12 years from date of purchase.
