ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made ASSEMBLY APP AVAILABLE ON We highly recommend downloading the Absco Sheds Assembly App to assist with your build. + Scan to download STEP BY STEP ASSEMBLY VIDEOS • PARTS CHECKLISTS • FAQ • 7 DAY CUSTOMER SERVICE • WARRANTY INFORMATION • COUNCIL FORMS 4” RETE 93” CONC SLAB 93” WALLS SIT ON THIS LEVEL When laying a concrete slab for your shed, it is best practise to have a rebated edge to prevent water ingress.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made GENERAL INSTRUCTIONS SAFETY NOTES • Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. • Some parts may have sharp edges. It is advisable to wear gloves when handling these items and safety glasses if drilling holes. Sensible shoes are highly recommended.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made COMPONENT PACKING LIST QTY DESCRIPTION PART # CHK QTY DESCRIPTION PART # 2 STEEL SHEET 70.3” x 30.4” 30A 2 STEEL SHEET 77.9” x 30.4” 42D 1 STEEL SHEET 70.3” x 30.4” 31A 6 STEEL SHEET 46” x 30.4” 49A 36L 2 STEEL SHEET 70.3” x 28.8” 32A 36R 1 STEEL SHEET DOOR 67.9” x 30.4” B STEEL SHEET 2 72.9” TO MIDPOINT x 30.4” 2 72.9” TO MIDPOINT x 30.4”” STEEL SHEET Nominal sheet widths are shown +/- 0.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made COMPONENT PACKING LIST QTY DESCRIPTION PART # CHK QTY DESCRIPTION PART # 1 CHANNEL 44.3” 54AL 1 CHANNEL 54AR 44.3” 1 CHANNEL 54CL 44.3” 1 CHANNEL 54CR 44.3” 1 CHANNEL 44.3” 54BL 1 CHANNEL 54BR 44.3” 1 CHANNEL 81DL 44.3” 1 CHANNEL 81DR 44.3” 4 CHANNEL 81CL 44.3” 4 CHANNEL 81CR 44.3” 2 CHANNEL 44.3” 60BL 2 CHANNEL 60BR 44.3” 2 CHANNEL 45” 83L 2 CHANNEL 45” 83R 1 HINGED CHANNEL 67.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made SNAPTiTE ASSEMBLY GUIDE The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for tools and fasteners. To assemble each panel, the perimeter channels are secured to the top and bottom of each panel. Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet. Each perimeter channel must finish flush with the edges of the sheets.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made Guide on Joining Spliced Channels The text marked on all parts must be shown on the same side as each other = = = = CSJ = JOIN>> <> JOIN>> JO IN Step 2.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made PRE-ASSEMBLY OF SPLICED CHANNELS Join together 20 x channel sections using 10 x channel joiners (Part CSJ) NOTE: Some channels may have holes in them - You will need to redrill holes where CSJ joining channel covers them. = 2 x 60B .
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Guide on Joining a Spliced Ridge Beam Follow these three steps to assemble a ridge beam. Australian Made If present, remove plastic coating from top side of ridge beam capping before assembly. ZARSP 8.86” 2” Step 1. Place two ridge beams as shown and push them together. Slide the cap of one under the other. Step 3. Turn over the ridge beam. Measure 9.84” from the middle along the centre of one ridge beam, mark spacings of 2”.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made PRE-ASSEMBLY OF SPLICED RIDGE BEAM ” 5/8 BR 97 ZARSP ” 8.8 = 1x 97B L B 97 . ” 5/8 th l ral .7” 88 e Ov g len . 1x 97BL 1x 97BR Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made Absco Industries 86A 86A 14A 49A 97B 49A 81C OVERVIEW OF ROOF COMPONENTS 49A 49A 86A 49A 49A 14A 60B 81C 86A OVERVIEW OF ROOF COMPONENTS Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made 89A 79B 54C 32A 36R 83R 83L 81D 36L 30A 42D 81C 81C 31A 54B OVERVIEW OF WALL COMPONENTS Absco Industries 89B 91A 90B 30A 36R 83R 42D 36L 15A 32A B 83L 54A 22A OVERVIEW OF WALL COMPONENTS Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made REAR PANEL ASSEMBLY 1x required. 30A 31A 30A 54B E APT iT N S 81D E APT iT N S Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made ROOF PANEL ASSEMBLY 2x required. 49A 49A 49A Fit 81C to edge of sheet with prepunched holes. 86A D 60B S D P TE NA T i D 81C D SN E APT iT 86A Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made SIDE PANEL ASSEMBLY 2x required. 36R 42D INS IDE 36L OF SH ED 83R 15A 83L 81C Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H FRONT PANEL ASSEMBLY Australian Made 89A 1x required. 89B 32A 32A SN E APT iT 54A SN APT iT E 90B E APT iT 79B SN 54C SN Absco Industries Assembly Instruction Manual E APT iT Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made DOOR PANEL ASSEMBLY SINGLE DOOR 1x required. 58C SNAPT iTE D 58A D D B 58B D 12A SNAPT iTE 58C Vertical door channels are installed in the opposite orientation compared to the horizontal door channels. B Long flange of channel Absco Industries Short flange of channel Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made DOOR PANEL ASSEMBLY SINGLE DOOR PANEL 91A 91A B NOTE: Nuts and bolts are also supplied and may be used instead of 1/4” drill bit to enlarge rivets. Use a 4mm these holes in the jamb NOTE: The holes to fasten the padbolt hasp are not pre-punched to allow for proper alignment. Position 1/8” the hasp centrally over the padbolt shaft and drill 3mm holes and secure with screws.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made PANEL CONSTRUCTION NOTE: Take care to ensure that all wall panels are not upside down. The top channels of each panel are pre-punched for attaching roof sheeting. The base channels are not prepunched. D D D D D D D D D D D Side wall channels fit into the notched rear wall channels. D Orient panel so channel (60B) goes into ridge beam 97B D D Channel (81C) this end D D D D D ide s his t l to .
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made INSIDE VIEW OF FIXING Secure peak brace to ridge beam and roof panel with one screw at each end Move the other roof panel into position and secure peak brace to ridge beam with one screw at each end Slide the roof panel into position and secure with one screw at each corner only at this stage. Absco Industries Assembly Instruction Manual Model: 23231GK-PTX 11/7/23 1.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made FINAL CONSTRUCTION D 14A D D D D D D D D D D D D D D D D D D D D Bend the top and bottom flanges as shown, then hook the bottom flanges under the top channel and screw top to the ridge beam with two screws.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made REINFORCING ROOF INSTALL ADDITIONAL SCREWS ALONG THE UNDERSIDE OF THE RIDGE BEAM, CENTERED IN EVERY SECOND PAN OF THE ROOF SHEETING AS PICTURED. THESE POSITIONS DO NOT HAVE PRE-PUNCHED HOLES SO USE THE SUPPLIED DRILL BIT TO PREDRILL HOLES THROUGH THE RIDGE BEAM, THE ROOF PANEL CHANNEL INSIDE IT AND THE ROOF SHEET. FIX USING A FAST001 SELF TAPPING SCREW IN EACH OF THESE POSITIONS.
ABSCO PREMIER SHED MODEL: 23231GK-PTX 7’ W x 7’ D x 6.5’ H Australian Made EXPORT PRODUCT WARRANTY AGAINST DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 12 years from date of purchase.
