Premier Garden Shed ABSCO PREMIER SHED MODEL:Instructions 30232GK-PTX Assembly 10’ W xJ30232G 7.5’ D x 7’ H Model: AU:(866) 1800 029 701 +1 788 3046 N Z: 0800 466 444 Australian Made FRONT: 9' 10 7⁄64" SIDE: 7' 4 31⁄32" HEIGHT: 6' 10 43⁄64" admin@absco.com.au www.abscosheds.com.
ABSCO PREMIER SHED PremierMODEL: Garden30232GK-PTX Shed - Model: J30232G Australian Made 10’ W x 7.5’ D x 7’ H GENERAL INSTRUCTIONS Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on pages three and four. SITE PREPARATION The site for the shed must be level.
ABSCO PREMIER SHED MODEL: 30232GK-PTX Premier 10’ Garden Shed - Model: J30232G Australian Made W x 7.5’ D x 7’ H COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART CHECK QTY No.
ABSCO PREMIER SHED MODEL: 30232GK-PTX Australian Made Premier10’ Garden W x 7.5’ DShed x 7’ H - Model: J30232G Premier Garden Shed - Model: J30232G COMPONENTS - SPLICED CHANNEL & RIDGE BEAM COMPONENTS - SPLICED CHANNEL & RIDGE BEAM QTY 10 COMPONENT DESCRIPTION CHANNEL JOINER L= 7 7⁄8" PART No. CSJ 1 1 2 2 2 JOIN 55AL JOIN 55CL 1 COMPONENT DESCRIPTION RIDGE BEAM JOINER L= 1' 5 23⁄32" 55BL 1 81BL 1 81AL 2 81CL 2 JOIN RIDGE BEAM L = 4' 11 7⁄8" 60AL 2 97AL 1 PART No.
ABSCO PREMIER SHED PremierMODEL: Garden30232GK-PTX Shed - Model: J30232G 10’ W x 7.5’ D x 7’ H Australian Made FULL LENGTH CHANNELS & ACCESSORIES COMPONENT DESCRIPTION QTY 1 2 1 CHANNEL L = 5' 1 47⁄64" CHANNEL WITH HINGES L = 5' 7 29⁄32" CHANNEL L = 5' 7 29⁄32" 220 PART No.
ABSCO PREMIER SHED MODEL: 30232GK-PTX Premier10’Garden Shed - Model: J30232G Australian Made W x 7.5’ D x 7’ H INSTRUCTIONS FOR JOINING SPLICED CHANNELS NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER. = = = = CSJ JOIN>> JOIN>> <> J STEP 1. STEP 2. Position the channels and the CSJ joiner channel so the center of the CSJ is in line with the end of each channel to be joined together.
ABSCO PREMIER SHED Premier MODEL: Garden 30232GK-PTX Shed - Model: J30232G 10’ W x 7.5’ D x 7’ H Australian Made STEP 1.
ABSCO PREMIER SHED PremierMODEL: Garden30232GK-PTX Shed - Model: J30232G 10’ W x 7.5’ D x 7’ H Australian Made STEP 2. PRE-ASSEMBLY OF SPLICED RIDGE BEAM QTY. = 1 TEK SCREW DRIVER BIT QTY. = 8 SELF DRILLING TEK SCREW RIDGE BEAM 4' 11 7⁄8" PARTS 97AL & 97AR QTY. = 2 QTY. = 1 PART ZARSP - 1' 5 23⁄32" " 5/8 AR 97 2" ZARSP 9 ⁄3 27 " /8 77 AL 97 THE TOP SECTIONS OF CAPPING WILL OVERLAP EACH OTHER AT THE JOIN BY 2.0".
ABSCO PREMIER SHED Premier MODEL: Garden 30232GK-PTX Shed - Model: J30232G 10’ W x 7.5’ D x 7’ H Australian Made INSTRUCTIONS FOR JOINING SPLICED RIDGE BEAM STAGE 1: PUSH RIDGE BEAMS TOGETHER, MAKE SURE THERE IS A 2" OVERLAP OF THE RIDGE CAP INSTRUCTIONAL VIDEOS 2" STAGE 2: INSERT RIDGE CAP JOINER INTO CONNECTED RIDGE CAPS. MAKE SURE JOINER HAS 8 55/64" IN EACH RIDGE CAP. 4" 8 55⁄6 2" STAGE 3: TURN RIDGE CAP OVER AND MEASURE 9 27⁄32" FROM THE END OF EACH RIDGE CAP.
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX ABSCO INDUSTRIES 86A 14A 97A 49A 81A 86A 49A 49A 49A 49A ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14 49A 49A 86A VIEW OF ROOF COMPONENTS 49A 14A 81A Premier Garden Shed - Model: J30232G 60A 86A 10’ W x 7.
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30232GK-PTX 42D 36R 83R 31A 23/09/19 34A 90A 55C 91A 89A 42D 79A 91A 81C 89A ASSEMBLY INSTRUCTION - MODEL: J30232G 26/02/14 81B 30A 36R 83R B 83L 55A INSTRUCTIONAL VIDEOS 34A A 36L 15A PAGE 11 10’ W x 7.
ABSCO PREMIER SHED Premier Garden Shed MODEL: 30232GK-PTX Model: 10’ W x 7.5’30152GK D x 7’ H INSTRUCTIONS AND VIDEOS Australian Made ABSCO ASSEMBLY INTRODUCTION The snaptite assembly system locks most perimeter channels to all roof and wall sheets without the need for tools and fasteners.
SHED J30232G PremierABSCO GardenPREMIER Shed - Model: MODEL: 30232GK-PTX DOOR PANEL ASSEMBLY 10’ W x 7.5’ D x 7’ H Australian Made 58C ATTACH 58C CHANNELS AS DESCRIBED ON PAGE 12 58C 58A 58B B 12A A 58C 58C 58A 89C ATTACH 89C WITH COLORED SIDE FACING OUT.
PremierABSCO GardenPREMIER Shed - Model: SHED J30232G MODEL: 30232GK-PTX REAR PANEL ASSEMBLY 10’ W x 7.
ABSCO PREMIER SHED PremierMODEL: Garden30232GK-PTX Shed - Model: J30232G 10’ W x 7.5’ D x 7’ H Australian Made ROOF PANEL ASSEMBLY (2 Required) LAY SHEETS OUT AS SHOWN 86A 49A 60A 2 x PRE-PUNCHED HOLES TO THIS END OF EACH SHEET WITH PART NO. 81A FITTED 49A 49A 49A 81A 86A ATTACH LIPS 86A AS SHOWN. LIPS SHOULD OVERLAP ROOF CHANNEL 81A AND 60A.
ABSCO PREMIER SHED PremierMODEL: Garden30232GK-PTX Shed - Model: J30232G 10’ W x 7.
ABSCO PREMIER SHED MODEL: 30232GK-PTX Premier Garden Shed 10’ W x 7.5’ D x 7’ H Model: 30152GK INSTRUCTIONS AND VIDEOS Australian Made DOOR PANEL ASSEMBLY 91A 91A B NOTE: Nuts and bolts (supplied) may be used instead of pop rivets (supplied) by simply enlarging the hinge hole sets in the jamb using a 5/32" drill bit A each door have not been pre-punched, to allow for NOTE: The two holes required to connect the padbolt hasp for each 1/8” with holes and secure with screws.
ABSCO PREMIER SHED MODEL: 30232GK-PTX Premier 10’ Garden Shed - Model: J30232G Australian Made W x 7.5’ D x 7’ H NO PADBOLT HASP REQUIRED AT TOP PANEL CONSTRUCTION NOTE: Take care to ensure that both front and rear wall panels are not positioned upside down. the top channel of each panel is pre-punched for attaching roof sheets to, the bottom channels are not.
ABSCO PREMIER SHED Premier MODEL: Garden 30232GK-PTX Shed - Model: J30232G 10’ W x 7.
ABSCO PREMIER SHED PremierMODEL: Garden30232GK-PTX Shed - Model: J30232G 10’ W x 7.
ABSCO PREMIER SHED MODEL: 30232GK-PTX 10’ W x 7.5’ D x 7’ H Australian Made EXPORT PRODUCT WARRANTY AGAINST DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 12 years from date of purchase.
