Absco Premier Garden Shed ABSCO PREMIER SHED Assembly Instructions MODEL: 30152GK-PTX Australian Made Model: 10’30152GK W x 5’ D x 6.5’ H AU:(866) 1800 029 701 +1 788 3046 N Z: 0800 466 444 FRONT: 9' 10 7/64" SIDE: 4' 11 13/16" HEIGHT: 6' 4 3/4" admin@absco.com.au www.abscosheds.com.
ABSCO PREMIER SHED PremierMODEL: Garden30152GK-PTX Shed - Model: J30232G Australian Made 10’ W x 5’ D x 6.5’ H GENERAL INSTRUCTIONS Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details. Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on pages three and four. SITE PREPARATION The site for the shed must be level.
ABSCO PREMIER SHED Premier Garden Shed MODEL: 30152GK-PTX Model: 30152GK 10’ W x 5’ D x 6.5’ H INSTRUCTIONS AND VIDEOS Australian Made COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS QTY COMPONENT DESCRIPTION PART CHECK QTY No.
ABSCO PREMIER SHED Premier Garden Shed MODEL: 30152GK-PTX Model: 10’ W x 5’ D30152GK x 6.5’ H INSTRUCTIONS AND VIDEOS Australian Made COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS QTY 8 COMPONENT DESCRIPTION PART CHECK QTY No.
ABSCO PREMIER SHED Premier Garden Shed MODEL: 30152GK-PTX Model: 10’ W x 5’ D30152GK x 6.5’ H INSTRUCTIONS AND VIDEOS Australian Made COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS QTY 2 1 1 COMPONENT DESCRIPTION Part No. Here JAMB L= 5' 10 1/4" PART No. 89A 89C Part No. Here JAMB L= 5' 7 15/16" CHECK QTY 4 4 COMPONENT DESCRIPTION PART No. CHECK 91A Part No. Here JAMB L= 3' 8 1/8" 85A A 85 LIP TRIM L= 2' 7 5/16" 90A Part No.
ABSCO PREMIER SHED Premier Garden Shed MODEL: 30152GK-PTX INSTRUCTIONS AND VIDEOS Model: 10’ W x 5’ D30152GK x 6.5’ H Australian Made INSTRUCTIONS FOR JOINING SPLICED CHANNELS NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER. = = = CSJ JOIN>> JOIN>> <> STEP 1. STEP 2. Position the channels and the CSJ joiner channel so the center of the CSJ is in line with the end of each channel to be joined together.
ABSCO PREMIER SHED MODEL: 30152GK-PTX Premier Garden Shed 10’ W x 5’ D x 6.5’ H Model: 30152GK INSTRUCTIONS Australian AND VIDEOS Made STEP 1.
ABSCO PREMIER SHED MODEL: 30152GK-PTX Premier Garden Shed INSTRUCTIONS AND VIDEOS Australian 10’ W x 5’ D x 6.5’ H Model: 30152GK Made STEP 2. PRE-ASSEMBLY OF SPLICED RIDGE BEAM QTY. = 1 TEK SCREW DRIVER BIT QTY. = 8 SELF DRILLING TEK SCREW RIDGE BEAM 4' 11 7/8" PARTS 97AL & 97AR PUSH QTY. = 1 PUSH QTY.
ABSCO PREMIER SHED PremierMODEL: Garden 30152GK-PTX Shed - Model: J30232G 10’ W x 5’ D x 6.5’ H Australian Made INSTRUCTIONS FOR JOINING SPLICED RIDGE BEAM STAGE 1: PUSH RIDGE BEAMS TOGETHER, MAKE SURE THERE IS A 2" OVERLAP OF THE RIDGE CAP 2" INSTRUCTIONAL VIDEOS STAGE 2: INSERT RIDGE CAP JOINER INTO CONNECTED RIDGE CAPS. MAKE SURE JOINER HAS 8 55/64" IN EACH RIDGE CAP. 4" 8 55⁄6 2" STAGE 3: TURN RIDGE CAP OVER AND MEASURE 9 27⁄32" FROM THE END OF EACH RIDGE CAP.
ABSCO INDUSTRIES NO. 14A 97A ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTX 17/09/19 PAGE 52A 52A 52A ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 85A 52A 52A 81A 52A 14A 60A 85A 10’ W x 5’ D x 6.
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30152GK-PTX 81E 36L 17/09/19 ABSCO INDUSTRIES 82R 34A 55C 90A 89A 79A 91A 91A 89A 81E 36R ASSEMBLY INSTRUCTION - MODEL: 30152GK 13/04/16 36R 31A 31A 30A 82R 36L A 34A 15A 82L B 55A PAGE 11 22A INSTRUCTIONS AND VIDEOS 10’ W x 5’ D x 6.
ABSCO PREMIER SHED Premier Garden Shed MODEL: 30152GK-PTX 10’ W x 5’ D30152GK x 6.5’ H Model: INSTRUCTIONS AND VIDEOS Australian Made ABSCO ASSEMBLY INTRODUCTION The snaptite assembly system locks most perimeter channels to all roof and wall sheets without the need for tools and fasteners.
ABSCO PREMIER SHED MODEL: 30152GK-PTX Premier Garden Shed INSTRUCTIONS Australian AND VIDEOS 10’ W x 5’ D x 6.5’ H Model: 30152GK Made 1. REAR PANEL ASSEMBLY 55B 30A E APT iT SN 31A 31A 30A P TE NA T i 81B S 2.
ABSCO PREMIER SHED Premier Garden Shed MODEL:30152GK 30152GK-PTX Model: 10’ W x 5’ D x 6.5’ H INSTRUCTIONS AND VIDEOS Australian Made 3. ROOF PANEL ASSEMBLY (2 Required) 52A 52A 52A 52A 2 x PRE-PUNCHED HOLES TO THIS END OF EACH SHEET WITH PART NO.
ABSCO PREMIER SHED Premier Garden Shed MODEL: 30152GK-PTX 10’ W x 5’ D30152GK x 6.5’ H Model: INSTRUCTIONS AND VIDEOS 4.
ABSCO PREMIER SHED Premier Garden Shed MODEL:30152GK 30152GK-PTX Model: INSTRUCTIONS AND VIDEOS 10’ W x 5’ D x 6.5’ H Australian Made 5.
ABSCO PREMIER SHED MODEL: 30152GK-PTX Premier Garden Shed Model: 30152GK 10’ W x 5’ D x 6.5’ H INSTRUCTIONS AND VIDEOS Australian Made DOOR PANEL ASSEMBLY 91A 91A B NOTE: Nuts and bolts (supplied) may be used instead of pop rivets (supplied) by simply enlarging the hinge hole sets in the jamb using a 5/32" drill bit A each door have not been pre-punched, to allow for NOTE: The two holes required to connect the padbolt hasp for each shaft 1/8”with holes and with screws. and drill secure screws.
ABSCO PREMIER SHED MODEL: 30152GK-PTX Premier 10’ W x 5’Garden D x 6.5’ H Shed Model: 30152GK INSTRUCTIONS Australian AND VIDEOS Made 7. PANEL CONSTRUCTION NOTE: Take care to ensure that both front and rear wall panels are not positioned upside down. The top channel of each panel is pre-punched for attaching roof sheets, the bottom channels are not.
ABSCO PREMIER SHED MODEL: 30152GK-PTX Premier Garden Shed 10’ W x 5’ D x 6.5’ H Model: 30152GK INSTRUCTIONS AND VIDEOS Australian 8.
ABSCO PREMIER SHED MODEL: 30152GK-PTX Premier Garden Shed 10’ W x 5’ D x 6.
ABSCO PREMIER SHED MODEL: 30152GK-PTX 10’ W x 5’ D x 6.5’ H Australian Made EXPORT PRODUCT WARRANTY AGAINST DEFECTS Congratulations on your purchase of an ABSCO SHED ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel. We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 12 years from date of purchase.
