User Manual

www.abrites.com
13
2021
Abrites Programmer User Manual
5. BDM ECU Programmer
This function is intended for BDM reading of EDC16XX/MED9.XX ECU memory. In order to read the ECU
memory in BDM you will need ZN045 ABPROG programmer, ZN073 BDM adapter and an external power
supply for working on bench.
▯▯ Warning: Please adhere to the provided sequence of operations. Failure to do so may lead to unin-
tended consequences, the least of which is a bricked ECU.
▯▯ Note: The BDM Programmer requires the ECU to be removed from the vehicle, as the programming
needs to take place on a workbench.
▯▯ Тools needed: 12/24V power supply, soldering iron, double-row 1.27mm pitch PCB headers
Please ensure you follow the steps below when connecting or disconnecting the ECU:
1. Ensure both AVDI and the ECU are powered off.
2. Remove ECU from vehicle and open it on workbench.
3. Solder 14-pin header on BDM test points, as indicated in example picture (picture coming soon)