2021 Abrites Programmer User Manual ABRITES PROGRAMMER User manual version 1.0 www.abrites.
021 Abrites Programmer User Manual Important notes The Abrites software and hardware products are developed, designed and manufactured by Abrites Ltd. During the production process we comply to all safety and quality regulations and standards, aiming at highest production quality.
2021 Abrites Programmer User Manual Copyright information Copyright: ▯ ▯ ▯ ▯ ▯ All material herein is Copyrighted ©2005-2021 Abrites, Ltd. Abrites software, hardware, and firmware are also copyrighted Users are given permission to copy any part of this manual provided that the copy is used with Abrites products and the “Copyright © Abrites, Ltd.” statement remains on all copies “Abrites” as used in this manual synonymous with “Abrites, Ltd.
2021 Abrites Programmer User Manual Table of contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 2. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.1 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.2 Supported devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2021 Abrites Programmer User Manual 1. Introduction The Abrites programmer is used for reading, writing and erasing different types of memories such as (inluding BDM reading/writing of EDC16/MED9.X ECUs): ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ ▯ SPI EEPROM I2C EEPROM MW EEPROM (Micro Wire) MPC 555/563/565 MPC 5XX EXTERNAL FLASH MPC 5XX EXTERNAL EEPROM RENESAS V850 MCU PCF MB NEC KEY(Mercedes-Benz) EWS(BMW) www.abrites.
2021 Abrites Programmer User Manual 2. Getting Started 2.1 System requirements Minimum system requirements – Windows 7, Pentium 4 with 512 MB RAM, USB port with supply 100 mA / 5V +/- 5% 2.
2021 Abrites Programmer User Manual MPC MPC555/556 Flash MPC555/556 CMF A/B Shadow Rows MPC533/534/564 CMF Flash MPC533/534/564 Shadow Row MPC535/536/565/566 CMF Flash MPC535/536/565/566 CMF A/B Shadow Rows MPC5XX External Flash (58BW016XX, AMDXX, Intel28XX, Micron 58BW016XX, Numonyx 58BW016XX, Spansion 29CXX, ST 58BW016XX) MPC5XX External EEPROM (ST 95640, ST 95320, ST 95160, ST 95080) ▯ Renesas V850 MCU UPD70FXXXX PFlash UPC70F35XX DFlash DFlash 32KB V850ES Renault BCM (X95) Renault HandsFree (X98) ▯
2021 Abrites Programmer User Manual 3. Hardware ZN030 - ABPROG set www.abrites.
2021 Abrites Programmer User Manual ZN031 - ABPROGEEPROM/BCM adapter ZN032 – ABPROG NEC adapter with socket ZN033 – ABPROG NEC adapter ZN034 - ABPROG flat cable ZN073 – BDM Programmer www.abrites.
2021 Abrites Programmer User Manual 4. Software When the programmer(ZN045) is connected to the AVDI you can start the software by selecting ABProg > Upgraded: www.abrites.
2021 Abrites Programmer User Manual This is the main screen of the software: The “Select” option will open the list with all supported devices: www.abrites.
2021 Abrites Programmer User Manual The “Read” option will read the memory of the selected device. The “Erase” option will erase the memory of the selected device. The “Program” option will program the selected device using the data from the hex editor. The “Verify” option will compare the memory of the selected device with the contents of the hex editor. The “Diagrams” option will show a wiring connection diagram(if available) for the selected device.
2021 Abrites Programmer User Manual 5. BDM ECU Programmer This function is intended for BDM reading of EDC16XX/MED9.XX ECU memory. In order to read the ECU memory in BDM you will need ZN045 ABPROG programmer, ZN073 BDM adapter and an external power supply for working on bench. ▯ ▯ ▯ Warning: Please adhere to the provided sequence of operations. Failure to do so may lead to unintended consequences, the least of which is a bricked ECU.
2021 Abrites Programmer User Manual 4. Connect the BDM adapter to the ECU using a ribbon cable. Warning: incorrect wiring may cause permanent damage to the adapter and/or the ECU. 5. Connect the BDM adapter(ZN073) to ABProg(ZN045). 6. Connect the ABProg(ZN045) to AVDI. 7. Connect AVDI to PC. 8. Power on AVDI. Ensure orange LED on BDM adapter is ON 9. Power on the ECU – it should immediately enter Debug mode. ▯ Ensure green LED on BDM adapter is ON 10. Launch the Abrites programming software 11.
2021 Abrites Programmer User Manual ABPROG to BDM ADAPTER PINOUT Connector A - Standard BDM (10 Pins) Connector B - BOSCH EDC BDM (14 Pins) Pin 1 VFLS 0 Pin 1 HRESET Pin 2 Not Connected Pin 2 Not Connected Pin 3 GND Pin 3 DSCK Pin 4 DSCK Pin 4 DSDI Pin 5 GND Pin 5 Not Connected Pin 6 VFLS 1 Pin 6 VCC Pin 7 HRESET Pin 7 Not Connected Pin 8 DSDI Pin 8 Not Connected Pin 9 VCC Pin 9 VFLS 1 Pin 10 DSDO Pin 10 VFLS 0 Pin 11 DSDO Pin 12 GND Pin 13 Not Connected Pin
