User Manual

www.abrites.com
7
2021
Abrites TAG Key Tool User Manual
2. Getting Started
2.1 Scope of the manual
This document describes the software and hardware installation of your transponder programmer named
“PROTAG Programmer” and corresponding software named “Abrites Tag KeyTool”.
The document is applicable for the transponder programmers from Abrites Ltd. - ZN002.
2.2 Your transponder programmer
2.3 System requirements
Minimum system requirements – Windows Vista+, Pentium 4 with 512 MB RAM USB port with supply
100 mA / 5V +/- 5%
2.4 Advice for using the ProTag programmer
It is very important to keep the ProTag programmer away from any metal objects or metal surfaces. Placing
it near metal objects or on metal surfaces will interfere with the field of the programmer and cause errors
when working with the programmer.