User Manual

www.abrites.com
17
2021
Abrites TAG Key Tool User Manual
In the list you can see the model, immobilizer module, type of memory where is stored key data and
needed transponder/key for programming.
When a model is select your next step should be to load the file containing the immobilizer data (dump).
You can load the dump
pressing button “Load Dump”.
You will have to to place then
your transponder/key in the
PROTAG programmer and
to press the button “Prepare
Key”.
Once the programming of the
transponder is finished, if it is
needed, you will be asked for
the file name of the modified
dump.
When a dump is loaded you should select the exact key position you want to program.
NOTE: Because different programmers can read from the immobilizer dump differently – NORMAL or
SWAPED, if after programming the transponder/key does not work, you will need to SWAP the dump and
load it back into the software and program a new key or transponder.