2021 Abrites TAG Key Tool User Manual ABRITES DIAGNOSTICS TAG KEY TOOL User manual version 2.4 www.abrites.
021 Abrites TAG Key Tool User Manual Important notes The Abrites software and hardware products are developed, designed and manufactured by Abrites Ltd. During the production process we comply to all safety and quality regulations and standards, aiming at highest production quality.
2021 Abrites TAG Key Tool User Manual Copyright information Copyright: ▯ ▯ ▯ ▯ ▯ All material herein is Copyrighted ©2005-2021 Abrites, Ltd. Abrites software, hardware, and firmware are also copyrighted Users are given permission to copy any part of this manual provided that the copy is used with Abrites products and the “Copyright © Abrites, Ltd.” statement remains on all copies “Abrites” as used in this manual synonymous with “Abrites, Ltd.
2021 Abrites TAG Key Tool User Manual Table of contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 2. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1 Scope of the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 Your transponder programmer . . . . . . . . . . . . . . . . . . . . . . .
2021 Abrites TAG Key Tool User Manual List of revisions Date Chapter Chapter Revision Total update of the manual. Cloning added 2.2 9 CAS4 Key Preparation update 2.3 7 Added cloning of DST+ (G chip), M48 Fixed key and Temic 8C 2.4 01.10.2015 ALL 13.09.2017 23.08.2018 www.abrites.
2021 Abrites TAG Key Tool User Manual 1. Introduction Congratulations for choosing our product! PROTAG programmer together with the Abrites TagKeyTool software will allow you to use your Windows based PC as a powerful programmer for transponders and tool for programming of transponder based keys. The PROTAG programmer is a hardware unit produced by Abrites Ltd. intended for programming of transponders via your AVDI interface. PROTAG programmer should be used with ABRITES software produced by Abrites Ltd.
2021 Abrites TAG Key Tool User Manual 2. Getting Started 2.1 Scope of the manual This document describes the software and hardware installation of your transponder programmer named “PROTAG Programmer” and corresponding software named “Abrites Tag KeyTool”. The document is applicable for the transponder programmers from Abrites Ltd. - ZN002. 2.2 Your transponder programmer 2.
2021 Abrites TAG Key Tool User Manual 3. Getting Started We suppose that your AVDI interface is configured and fully working. You can receive an optional separate installation file of your “Abrites Tag KeyTool” software for your AVDI and PROTAG programmer. The software is a windows executable file named ‘SetupTagKeyTool_VVxxxx.exe’ where VVxxxx is your interface identification number. 3.
2021 Abrites TAG Key Tool User Manual Read the license agreement and select “I accept the agreement” if you accepting all. Then press the “next” button. If you not agree press cancel to interrupt installation procedure. Press the “Next” button to proceed with the installation. Press the “Next” button to proceed with the installation. www.abrites.
2021 Abrites TAG Key Tool User Manual Press the “Next” button to proceed. If you do not want desktop icons uncheck the checkbox about creation of icons. Press “Next” button to proceed. Press “Install” and wait until installation complete. www.abrites.
2021 Abrites TAG Key Tool User Manual Be sure that the checkbox about the installation of the interface’s USB drivers is set especially if you are installing for the first time. Press “Finish”. Depending on the setting of your operation system you can be asked to confirm installation of USB drivers. Press “Yes”. Wait until the installation of USB driver finishes. www.abrites.
2021 Abrites TAG Key Tool User Manual 3.2 Connection of the PROTAG programmer to the interface Once your AVDI interface is ready for work you can connect the PROTAG programmer to the PC through one of the available USB ports of your PC. 3.3 Starting of the software When the programmer is ready and connected to the PC you can start some of the applications from your installation package.
2021 Abrites TAG Key Tool User Manual You have also the ability to access additional EEPROM memory of the keys, to prepare a key ready for starting of the vehicle using ‘Key Tool’, to prepare transponders ready for programming by diagnostic equipment – ‘Production’ and also you can prepare a ‘cloning’ of a key using function ‘Key Cloner’. www.abrites.
2021 Abrites TAG Key Tool User Manual 4. TagKey tool – working with different transponders Once an option is selected from the drop down list you will find a screen with options which allows you to read and program the fields of the transponder. The main buttons named “Read/Detect” and “Program” are intended to read and program the whole memory of the transponder if that is possible.
2021 Abrites TAG Key Tool User Manual 5. TagKey tool – Key tool andpreparation of a key by dump of immobilizer system “Key tool” is a utility intended for preparation of a key when a dump from immobilizer system of the vehicle is present. From the list of transponders and functions of the main screen you can select this utility. www.abrites.
2021 Abrites TAG Key Tool User Manual Once you select the “Key tool” option a screen will appear with a drop down list where you can select your model and immobilizer system. www.abrites.
2021 Abrites TAG Key Tool User Manual In the list you can see the model, immobilizer module, type of memory where is stored key data and needed transponder/key for programming. When a model is select your next step should be to load the file containing the immobilizer data (dump). You can load the dump pressing button “Load Dump”. When a dump is loaded you should select the exact key position you want to program.
2021 Abrites TAG Key Tool User Manual 6. TagKey tool – Production utility and preparation of a key ready for programming by diagnostic equipment “Production” is a utility intended for preparation of transponders ready for programming by diagnostic equipment. From the list of transponders and functions of the main screen you can select this utility. From the screen “Production” utility you have to choose which type of transponder key you want to be prepared.
2021 Abrites TAG Key Tool User Manual 7. TagKey tool – Cloning of a key The “Key cloner” function allows you to prepare a clone of some keys. Supported keys/transponders for cloning currently are: Megamos 13, Temic 11, Temic 12, Toyota/Lexus/Scion Texas TIRIS 4D, all types of ID33, Megamos 48 FIXED KEY, DST+ (G chip) and Temic 8C When a key is placed in the PROTAG programmer press the button “Read/Detect”.
21 Abrites TAG Key Tool User Manual ▯ Cloning of 4D transponders 7. 1. Offline www.abrites.
2021 Abrites TAG Key Tool User Manual 7. 2. Online www.abrites.
2021 Abrites TAG Key Tool User Manual ▯ 4E transponder cloning online: ▯ 5E transponder cloning online: www.abrites.
2021 Abrites TAG Key Tool User Manual ▯ 8C transponder cloning: www.abrites.
2021 Abrites TAG Key Tool User Manual ▯ Hitag 2 Transponder Cloning www.abrites.
2021 Abrites TAG Key Tool User Manual www.abrites.
2021 Abrites TAG Key Tool User Manual www.abrites.
2021 Abrites TAG Key Tool User Manual www.abrites.
2021 Abrites TAG Key Tool User Manual www.abrites.
2021 Abrites TAG Key Tool User Manual www.abrites.
2021 Abrites TAG Key Tool User Manual www.abrites.
2021 Abrites TAG Key Tool User Manual 8. Porsche Panamera key by dump ▯ Read the 9S12XDP512 or 9S12XEP100 EEPROM using a programmer. Load the EEPROM dump in the Tag software and choose a position where you would like to write the new key. ▯ Place a new key in the PROTAG programmer and press the “Prepare key” button. ▯ The software will modify the dump and the user should save it to a new file.
2021 Abrites TAG Key Tool User Manual 9. CAS4 by dump In order to prepare a CAS 4 key by dump you need to: ▯ Read the XEP100 MCU’s EEPROM and save it to a file. ▯ Load the file into the TAG key tool and select the correct key position. ▯ Use PCF7939 transponder or a new remote key. ▯ Prepare the key. ▯ You will be asked to either read the working key or enter the DME/DDE ISN. Please use the checkbox option according to the situation (Working key or DME/DDE ISN).