User Manual

www.abrites.com
19
2021
Abrites Diagnostics for Tesla User Manual
4.2 Airbag Reset - clear crash data, read/write VIN
The TESLA Airbag Reset special function gives access to customers to perform various calibrations in the
airbag module of all TESLA vehicles (Model S/X and Model 3).
It covers both Bosch and Delphi produced airbag modules completely by diagnostics.
Supported functions for Bosch airbag modules:
▯▯ Airbag exchange
▯▯ read/update data in the module (modify EEPROM)
▯▯ clear crash data
▯▯ change VIN
Important: All functions for Delphi airbag are performed by diagnostics(ZN072 cable set for Tesla is
required).
Supported functions for Delphi airbag modules:
▯▯ read EEPROM (on bench)
▯▯ clear crash data (on bench)
In order to read the EEPROM of the Delphi airbag module you will need the following connection to the
Delphi airbag module through the CB100 cable of the AVDI:
B+(Delphi airbag) -> B+ (external power supply)
GND (Delphi airbag) -> GND (external power supply)
CAN H (Delphi airbag) -> pin 1 (CB100 Abrites OBDII cable)
CAN L (Delphi airbag) -> pin 9 (CB100 Abrites OBDII cable)