User Manual

www.abrites.com
23
Abrites Diagnostics for FCA User Manual2023
4.3 Key Learning Fiat Ducato, Fiat 500L, Iveco Daily 2020+
This is how you can program a key to Fiat Ducato, Fiat 500L, Iveco Daily 2020+:
1. You need to take out the BCM unit and open the plastic cover
2. Find the EEPROM and solder ZN057 as per the diagram on the next page
3. Read the SPI 95640 memory with ABProg - this will give you the PIN. This peocedure is execued with
the ZN030 ABProg programmer, and the ABProg upgraded software > save the dump file on your
computer
4. Load the file into the FCA Software > Special Functions > Transponder Maker and prepare a tran-
sponder ID46 7936 (or 7946)
5. Proceed to Key Learning procedure
Required tools:
▯▯ ZN030 ABProg programmer
▯▯ ZN057 EEPROM wire extender for ABPROG EEPROM/BCM adapter
▯▯ ZN002 or ZN003 ProTag Programmer