Owner`s manual

Functions
9
Front panel controls
Rear panel connections
1. Balanced Audio Outputs
The V6.0 features true balanced (XLR) outputs. This is a higher quality output that can reject noise and interference with equipment
with balanced inputs. These balanced outputs are ideally suited for connection to the ABRAHAMSEN V2.0 and V3.0.
2. Unbalanced Audio Outputs
Single-ended conventional stereo outputs for connection to the line-level phono/RCA inputs of an amplifier.
3.
S/P DIF co-axial – to obtain best results, use a high quality 75 ohm digital RCA interconnect cable.
TOSLINK optical – use a high quality TOSLINK fibre-optic interconnect cable designed specifically for audio use.
Note: This unit only accepts two-channel LPCM digital audio (e.g. Dolby Digital 2.0). You cannot connect a Dolby Digital 5.1 or a
DTS signal as they will not be recognised. If you wish to connect a DVD or similar device, please ensure that the sound output of
your player is set to two-channel PCM.
1.
Power On/Off
Switches the unit between On and Off.
2. Source and 3. Selector
Press to select between USB playback or Digital Inputs 1,2 and 3. The corresponding LED will light up to show which source has
been selected.