Owner`s manual

Power up
How to power up your system
You should always power up your system the following way:
Signal sources (CD player, tuner etc.) first, Then the D/A
Converter/power amplifier. When turning your system off, you
should start by switching off your power amplifier. Finally the
signal source devices.
Important notice
For optimal sonic performance, the V6.0 should be burned in
for a minimum time of 96 hours.
If the product has been switched off, allow two hours of
warm-up to optimise sonic performance.
Due to high class A operation in all
ABRAHAMSEN
©
designs,
it is normal for the product to feel warm.
Proper
ventilation is important. The product should NEVER be com-
pletely covered.
A good rule of thumb is to allow at least 3-5 cm (1-2 inches)
of air sidewise, and 5-8 cm (2-3 inches) above the product.
15