User guide

16
Allow the device to cool before removing attachments.
After approximately 5 minutes, when the unit has cooled sufficiently, the red
pin on the safety cap will release to allow for removal - this is a pressure
release valve.
You can speed up the cooling time by releasing the steam pressure by
pressing the steam trigger. Make sure the steam is released in a safe area i.e.
a sink.
If the cap will not open after allowing 5 to 10 minutes to cool, push down the
red pin in to the safety cap.
After doing so you can unscrew the safety cap and empty the water from the
tank into a sink.
Refer to cleaning and care instructions on page 17.
Ensure that the steam cleaner is dry and store in a cool, dry place.
When you have finished cleaning, turn the
steam cleaner off by pressing the OFF button.
Turn the power off at the plug socket and
remove the plug.
Storing your steam cleaner