User guide

Using: accessories

Attach this tool to the steam gun to give concentrated, direct

steam.

It can also be used with the other small tools provided –

refer to page 15.

These tools are for cleaning hard to reach areas, such as

corners, radiators etc., as well as various surfaces.

Refer to page 15.

Elbow attachment and floor brush

Attaching the main tools

The two main accessories for this product are the jet nozzle adaptor and the

elbow attachment. They both attach to the steam gun in the same manner.

NOTE: The elbow nozzle comes pre-assembled with the floor brush attached.

Jet nozzle adaptor

The elbow attachment (1.A) comes pre-assembled with the

floor brush and is for this attachment only (1.B).

The floor brush is suitable for the cleaning of large washable

wall and floor areas. It can be used with or without the floor

cloth provided.

Refer to page 14 for uses and operation.

To attach both these main tools to the steam gun, align and push the nozzle or

attachment as far as it will go until you hear it click into place.

To remove, press the release button underneath the nozzle or attachment and

pull away.

Note:

Unplug the cleaner and allow to cool before fitting or changing attachments -

they become hot during use.

Take care when removing accessories. The tip of the steam hose/nozzle can get

very hot during operation.

1. A

1. B