User guide

12
Using your steam cleaner
Steam hose
Steam gun
Steam regulator
Before turning the cleaner on, place the hose
into the steam socket.
To place the steam hose and handle into the
main steam cleaner:
• Open the steam socket,
• Press the hose in firmly until it clicks in place.
• To remove the hose press the side buttons
inwards and pull out.
Press the steam trigger to release steam from the nozzle.
Direct the steam at a cloth or into a sink until the steam
is emitted evenly.
Keep the steam trigger pressed and direct the steam at
the surface to be cleaned, removing the dirt by moving
the steam jet backwards and forwards over the area.
To stop the steam jet, release the steam trigger.
When not in use, ensure the safety lock is on.
To unlock the steam gun, press the lock mechanism on the right so it protrudes
on the left side of the gun.
To lock the steam gun, press the lock mechanism to the left so it protrudes on the
right side of the gun.
Turn the steam knob to regulate the steam emission. Turning
anti-clockwise should increase the intensity of the steam
Note:
Initially hot water may be ejected.
Aim the steam safely and do not focus steam for long periods.