Parts List

3
 Supervision
 After installation, the Remote Keypad will automatically transmit Supervision Signals to the Control Panel at an interval
of 30 to 50 minutes.
 Power Saving Feature
 When idle, Remote Keypad is in stand-by mode to conserve power. It will wake up when any key is pressed and the
Abode logo will be turned on. Please note the Abode logo color will be displayed based on current system mode. The
logo will be turned off after 5 seconds of key inactivity.
 Upon completion of a command input, the Remote keypad will return to stand-by mode.
 Getting Started
1. Put the Control Panel into learning mode. Please refer to your Control Panel’s user manual for details.
2. Press numeric “1” and “3” keys together, the Remote Keypad will emit 1 long beep and send a learning code to the
Control Panel. After the Control Panel receives the signal, it will send an acknowledgment back to the Remote Keypad.
The Remote Keypad will emit 3 beeps to indicate.
<
<
N
N
O
O
T
T
E
E
>
>


If the Remote Keypad did not sound a long beep, it means the Remote Keypad did not send the learning code to
the Control Panel, please press numeric “1” and “3” keys together again to send the learning code. If the Remote
Keypad does not perform 3 beeps, please restart the learning procedure.
3. If the Remote Keypad does not receive the acknowledgement from the Control Panel within 60 seconds, the Abode logo
LED will blink yellow for 4 times to indicate.
4. After the Remote Keypad is learnt-in, hold the Remote Keypad in a desired location and check whether it is within signal
range of the Control Panel. Please refer to your Control Panel’s user manual for details.
5. When you are satisfied with the chosen location, you can proceed to mount the Remote Keypad. Please refer to
Installation section for more details.
 Alarm function
 Panic Alarm — Press the Away Key for 3 seconds to trigger a panic alarm, the keypad will release one long
beep, and the Control Panel will sound alarm with its built-in siren.
 Fire Alarm — Press the Home Key for 3 seconds to trigger a fire alarm, the keypad will release one long beep,
and the Control Panel will sound alarm with its built-in siren.
 Medical Alarm — Press the
Standby Key for 3 seconds to trigger a medical alarm, the keypad will release one
long beep, and the Control Panel will sound alarm with its built-in siren.
 Dual-key function
 Learn Code — Press both numeric “1” and “3” keys together to send a learn code to the Control Panel. The
Remote Keypad will emit 1 long beep to indicate. To exit learning mode, press the Standby key, the Remote
Keypad will emit 2 beeps.
 PIR Detection — Press both numeric “4” and “6” keys together to disable PIR detection function, the Remote
Keypad will emit 2 beeps. To enable this function, press the two keys together, the Remote Keypad will emit 1 long
beep to indicate.
 Confirm Sound — Press both numeric “7” and “9” keys together to disable confirm sound, the Remote Keypad will
emit 2 beeps to indicate. To enable this function, press the two keys together, the Remote Keypad will emit 1 long
beep to indicate.
 System Mode Change and Result
Users can use the Remote Keypad to quick arm the system or arm the system with user PIN code. After entering user PIN
code, press the Standby/Home/Away key to enter System Standby (disarmed)/ Home (home armed)/Away (away armed)
mode.
 System Disarmed:
When system changes to “Standby” mode, the Remote Keypad will emit 2 beeps and the Abode logo will
display solid white for 1 second. If there is alarm memory, the Remote Keypad will emit 5 beeps
and the Abode logo will display solid white.
 Home Armed:
There are two ways to enter Home Armed mode. Users can enter Home Armed mode by pressing the Home key to
directly arm the system, or by entering user PIN Code followed by the Home key.
When system changes to “Home Armed” mode, the Remote Keypad will emit 3 beeps and the Abode logo will
display solid blue for 1 second.
 Away Armed:
There are two ways to enter Away Armed mode. Users can enter Away Armed mode by pressing the Away key to
directly arm the system, or by entering user PIN Code followed by the Away key.
When system changes to “Away Armed” mode, the Remote Keypad will emit 1 long beep and the Abode logo will
display solid orange for 1 second.
 Incorrect PIN Code:
When incorrect password is submitted, the Remote Keypad will emit 4 beeps and the Abode logo fast blinks red for
5 times. If there are 5 incorrect PIN Code attempts within 10 minutes, the Remote Keypad will be automatically