User's Manual

- 42 -
Move the selected network back one position
Add…
Click the button and the Wireless Network
Properties window will appear. In the Network
name field, enter your desired network name listed
in the above Available networks box, and click
OK.
Note: The new settings will be active only after
you click on OK in the Wireless Network
Connection Properties window.
Remove
Highlight the unwanted network listed in the
Preferred networks box, and click the button to
remove it.
Properties
Highlight the network listed in the above
Preferred networks box, and click the button to
display its properties.
Once network configuration is done, make sure to
click OK. The new parameters will be saved and
active only after doing so.