User Manual

IP Address

Note: When assigning IP Addresses to the computers on the network,

remember to have the IP address for each computer set on the same

subnet mask. If your Broadband Router use DHCP technology, however, it

won’t be necessary for you to assign Static IP Address for your computer.

To configure a dynamic IP address (i.e.

if your broadband Router has the

DHCP technology), check the Obtain

an IP Address Automatically option.

To configure a fixed IP address

(if you

broadband Router is not DHCP supported,

or when you need to assign a static IP

address), check the Use the

following IP

address option. Then, enter an IP

address

into the empty field, for example,

enter

192.168.1.1 in the IP address field

, and

255.255.255.0 for the Subnet Mask.