User's Manual

Chapter 1: Introduction
2
Internet WAN
Green
ON Internet link / active
OFF Internet function off
Blinking Internet traffic transmitting
WPS WPS
Green
ON WPS setup successfully
OFF WPS is disabled
Blinking
WPS is enabled to make
a connection
Wireless
LAN
WLAN
Green
OFF WLAN off
ON WLAN link / active
Blinking WLAN traffic transmitting
LAN
Green
OFF LAN function off
ON LAN link / active
Blinking LAN traffic transmitting
USB WPS
Green
ON USB is connected
OFF USB is disconnected
Ports and Buttons
Ports and buttons
Ant. 1
Ant. 2
Install the appending antennas here.
Reset
Keep on pressing the Reset button more than 3 seconds, the
Wireless Router will set all setting back to factory default.
USB
Insert the USB 3.5G card that provided by your ISP (Internet
Service Provider) or USB network attached storage here.
LAN 1-4
Use standard LAN cables (RJ45 connectors) to connect your
PCs to this port. If required, any port can be connected to
another hub. Any LAN port will automatically function as an
"Uplink" port when necessary.