User's Manual

Chapter 3: Configuration

Authentication: Select Open System, Shared Key or Auto.

Key Length: select key length 64-bit or 128-bit.

Key Format:

z Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).

z Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).

z ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).

z ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).

Encryption Key: Enter the key in the key setting field.

WPA-PSK/ WPA2-PSK/ WPA-PSK WPA2-PSK

Authentication Mode: Select Enterprise (RADIUS) or Personal (Pre-Shared

Key) mode.

WPA Cipher Suite: here supported AES only.

WPA2 Cipher Suite: here supported AES only.

Pre-Shared Key Format: There are two formats for choice to set the Pre-

shared key, Passphrase and Hex (64 characters). If Hex is selected, users

will have to enter a 64 characters string. For easier configuration, the

Passphrase (at least 8 characters) format is recommended.

Pre-Shared Key : Pre-Shared Key serves as a password. Users may key in 8

to 63 characters string if you selected passphrase. Pre-shared key format to

set the passwords or leave it blank, in which the 802.1x Authentication will

be activated. Make sure the same password is used on client's end.