User's Manual
Chapter 2: About Operation Modes
5
Router Mode
In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is
enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type can
be setup in WAN page by using PPPOE, DHCP client, PPTP client , L2TP client or static IP.
Access Point Mode
When acting as an Access Point (AP), this device connects all the stations (PC/notebook with wireless
network adapter) to a wireless network. All stations can have the Internet access if only the Access
Point has the Internet connection.










