User's Manual

Chapter 1: Introduction
2
OFF WAN function off
Blinking WAN traffic transmitting
OFF LAN function off
ON LAN link / active
LAN
LAN 1
LAN 2
LAN 3
LAN 4
Green
Blinking LAN traffic transmitting
Rear Panel
Ports and buttons
Ant.
Install the appending antennas.
WPS
To enable the WPS function via web configuration (Go to
Wireless Configuration > Advanced Configurations > WPS),
then press the physical WPS button on the Wireless Router once,
then the LED will start to flash. Please make a connection with
other WPS supported device within 2 minutes.
LAN 1-4
Use standard LAN cables (RJ45 connectors) to connect your PCs
to this port. If required, any port can be connected to another hub.
Any LAN port will automatically function as an "Uplink" port when
necessary.
Internet
Connect the ADSL or Cable Modem here with RJ45 cable. If your
modem came with a cable, use the supplied cable, otherwise, use
a standard LAN cable (RJ45 connectors).
DC 12V
Connect the supplied power adapter here.