User's Manual

Chapter 3: Configuration
41
user can click Connect button to make a connection.
Idle Time: It represents that the device will idle after the minutes you
set. The time must be set between 1~1000 minutes. Default value of
idle time is 5 minutes. This function will be available when the
Connection Type is selected to Connect on Demand.
MTU Size: The most appropriate MTU (Maximum Transmission Unit)
namely the maximum packet size, the default value is 1492 for your
application. Reducing the packet size can help connecting to certain
web sites or speeding up packet transfer rate. If the incorrect packet
size is entered, you may not be able to open certain web sites.
L2TP
If the L2TP be selected, user have to set up the server IP address, user
name and password according to the ISP that provided the related
information.
IP Address: Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the subnet mask here.
Server IP Address: Enter the L2TP Server IP Address in this column.
User Name: Maximum input is 20 alphanumeric characters (case
sensitive).
Password: Maximum input is 32 alphanumeric characters (case
sensitive).
Connection Type: Select the connection type Continuous, Connect
on Demand or Manual from the pull-down menu. If selected Manual
user can click Connect button to make a connection.
Idle Time: It represents that the device will idle after the minutes you
set. The time must be set between 1~1000 minutes. Default value of
idle time is 5 minutes. This function will be available when the
Connection Type is selected to Connect on Demand.
MTU Size: The most appropriate MTU (Maximum Transmission Unit)
namely the maximum packet size, the default value is 1492 for your
application. Reducing the packet size can help connecting to certain
web sites or speeding up packet transfer rate. If the incorrect packet
size is entered, you may not be able to open certain web sites.