User's Manual

Chapter 3: Configuration
34
Advanced
Port Filtering
Enable Port Filtering
Check to enable Port Filtering function.
Port Range
Enter the beginning of the range of port numbers used by the
service. If the service uses a single port number, enter it in both the
start and finish fields.
Protocol
Select the protocol (TCP, UDP or Both) used to the remote system
or service.
Comment
You may key in a description MAC address.
Apply Changes
After completing the settings on this page, click Apply Changes
button to save the settings.
Reset
Click Reset button to restore to default values.
Current Port Forwarding
Table
Shows the current Port Forwarding information.
Delete Selected
Click Delete Selected button to delete items which are selected.
Delete All
Click Delete All button to delete all the items.
Reset
Click Reset button to rest.