User's Manual

Chapter 3: Configuration
26
Key Length: select key length 64 Bits or 128 Bits.
RADIUS Server IP Address: Enter the RADIUS Server’s IP Address
provided by your ISP.
RADIUS Server Port: Enter the RADIUS Server’s port number provided
by your ISP. The default is 1812.
RADIUS Server Password: Enter the password that the AP shares with
the RADIUS Server.
WPA
Authentication Mode: Select Enterprise (RADIUS) or Personal (Pre-
Shared Key) mode.
WPA Cipher Suite: here supported AES only.
Pre-Shared Key Format: There are two formats for choice to set the Pre-
shared key, Passphrase and Hex (64 characters). If Hex is selected, users
will have to enter a 64 characters string. For easier configuration, the
Passphrase (at least 8 characters) format is recommended.
Pre-Shared Key : Pre-Shared Key serves as a password. Users may key in
8 to 63 characters string if you selected passphrase. Pre-shared key format
to set the passwords or leave it blank, in which the 802.1x Authentication
will be activated. Make sure the same password is used on client's end.
WPA2
Authentication Mode: Select Enterprise (RADIUS) or Personal (Pre-
Shared Key) mode.
WPA2 Cipher Suite: here supported AES only.
Pre-Shared Key Format: There are two formats for choice to set the Pre-