User's Manual

Chapter 3: Configuration

Security

Security Mode

Select desired security type from the pull-down menu Disable, WEP,

WPA, WPA2 and WPA-Mixed. The default setting is Disable. It is

strongly recommended to set up security mode (WEP, WPA, WPA2 and

WPA-Mixed) to prevent any unauthorized accessing.

WEP

802.1x Authentication: Check the box to enable the 802.1x authentication.

Authentication: Select Open System, Shared Key and Auto.

Key Length: select key length 64-bit or 128-bit.

Key Format:

z Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).

z Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).

z ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).

z ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).

Encryption Key: Enter the key in the key setting field.

802.1x Authentication