User's Manual

Chapter 3: Configuration
16
If the L2TP be selected, user have to set up the server IP address, user name
and password according to the ISP that provided the related information.
IP Address: Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the subnet mask here.
Server IP Address: Enter the L2TP Server IP Address in this column.
User Name: Maximum input is 20 alphanumeric characters (case sensitive).
Password: Maximum input is 32 alphanumeric characters (case sensitive).
Step 5- Wireless Basic Settings
Band
Select 2.4 GHz (B+G+N), 2.4 GHz (B), 2.4 GHz (G), 2.4 GHz (N), 2.4
GHz (B+G), and 2.4 GHz (G+N).
Mode
Select 11b/g mixed, 11b only, 11g only, or 11b/g/n mixed mode from
the pull-down menu. (Default is 11b/g/n mixed mode.)
Network Type
This type here is fixed and cannot be changed.
Network Name
(SSID)
A SSID is referred to a network name because essentially it is a name
that identifies a wireless network.
Channel Width
Select 20/40MHz or 20MHz for the transmitting band width.
Control Sideband
Select Upper or Lower from pull-down menu.
Channel selection
Select 1~11 or Auto Select from the pull-down menu.