User's Manual

Chapter 2: About Operation Modes
21
Password: Maximum input is 32 alphanumeric characters (case sensitive).
Connection Type: Select the connection type Continuous, Connect on
Demand or Manual from the pull-down menu. If selected Manual user
can click Connect button to make a connection.
Idle Time: It represents that the device will idle after the minutes you set.
The time must be set between 1~1000 minutes. Default value of idle time is
5 minutes. This function will be available when the Connection Type is
selected to Connect on Demand.
MTU Size: The most appropriate MTU (Maximum Transmission Unit)
namely the maximum packet size, the default value is 1460 for your
application. Reducing the packet size can help connecting to certain web
sites or speeding up packet transfer rate. If the incorrect packet size is
entered, you may not be able to open certain web sites.
L2TP
If the L2TP be selected, user have to set up the server IP address, user
name and password according to the ISP that provided the related
information.
IP Address: Enter the WAN IP address provided by your ISP here.
Subnet Mask: Enter the subnet mask here.
Server IP Address: Enter the L2TP Server IP Address in this column.
User Name: Maximum input is 20 alphanumeric characters (case
sensitive).
Password: Maximum input is 32 alphanumeric characters (case sensitive).
Connection Type: Select the connection type Continuous, Connect on
Demand or Manual from the pull-down menu. If selected Manual user
can click Connect button to make a connection.