User's Manual

Chapter 1: Introduction
2
WPS WPS
Green
ON WPS setup successfully
OFF WPS is disabled
Blinking
WPS is enabled to make
a connection
Wireless
LAN
WLAN
Green
OFF WLAN off
ON WLAN link / active
Blinking WLAN traffic transmitting
LAN
Green
OFF LAN function off
ON LAN link / active
Blinking LAN traffic transmitting
System SYS
Green
ON
System is ready to login
web server
OFF
System is not ready to
login web server
Blinking
System is set to factory
default
Ports and Buttons
Ports and buttons
Ant. 1
Ant. 2
Install the appending antennas here.
Reset
z Press 2 seconds, the LED will be off.
z Keep on pressing reset button 2~5 seconds, the system
will reboot automatically.
z Keep on pressing the reset button more than 5 seconds,
the Wireless Router will set all setting back to factory
default.
LAN 1-4
Use standard LAN cables (RJ45 connectors) to connect your
PCs to this port. If required, any port can be connected to
another hub. Any LAN port will automatically function as an
"Uplink" port when necessary.