User's Manual

Step 2. Then go back to Wireless Settings > WDS page to select WDS mode (Lazy, Bridge,

Repeater) and then enter Wireless MAC address (please go to Wireless Settings> Basic to

make sure the BSSID) 12 characters to each other to make the WDS connection. Please

click Apply button to execute. (If selected Lazy mode, do no need to enter the BSSID.)

Wireless Distribution System (WDS)

WDS Mode

Select the mode from the pull-down menu, Disable, Lazy Mode, Bridge

Mode or Repeater Mode. (Default WDS mode is Disable.)

If the users would like to set up the WDS function, please go to Wireless

Settings> Basic to set up APs that should use the same SSID and Channel ,

then go back to Wireless settings> WDS to enter Wireless MAC(BSSID)

of each other to make the WDS connection.