User's Manual

Virtual Server Settings

Select Enable or Disable from the pull-down menu.

IP Address

Enter the local server’s IP address.

Port Range

For TCP and UDP services enter the beginning of the range of port

numbers used by the service. If the service uses a single port number,

enter it in both the start and finish fields.

Protocol

Select the protocol (TCP, UDP or TCP&UDP) used to the remote

system or service.

Comment

You may key in a description for the IP address.

DMZ

DMZ Settings

If the DMZ Host Function is enabled, it means that you set up DMZ host at

a particular computer to be exposed to the Internet so that some

applications/software, especially Internet / online game can have two-way

connections. Select Enable or Disable from the pull-down menu.

DMZ IP Address

Enter the IP address of a particular host in your LAN that will receive all the

packets originally going to the WAN port/ Public IP address above.

Note: You need to give your LAN PC clients a fixed/ static IP

address for DMZ to work properly.

Apply

Click to save and apply the current settings.

Reset

Press to discard current settings.