User's Manual

47
that don't match with any
rules would be:
or deny connection for the MAC that user set in below settings.
Apply
Click to save and apply the current settings.
Reset
Press to discard the current settings.
MAC Address
Enter the client MAC address that user would like to
connect(accept) or disconnect(drop).
Dest IP Address
Enter the local server’s IP address.
Source IP Address
Enter the source IP address.
Protocol
Select the protocol (None, TCP, UDP or ICMP) used to the
remote system or service.
Dest Port Range
Source Port Range
For TCP and UDP services enter the beginning of the range of
port numbers used by the service. If the service uses a single port
number, enter it in both the start and finish fields.
Action
Select rules for DROP, or rules for ACCEPT form the pull-down
menu. Select Drop to disconnect with the Wireless Portable
Router that MAC address has be set, and ACCEPT to allow the
device that connect with the Wireless Portable Router.
Comment
Key in a description for these settings.
Port Forwarding