User's Manual

This page allows you to use the setting for WPS (Wi-Fi Protected Setup). Using this feature could let

your wireless client atomically synchronizes its setting and connect to the Access Point in a minute

without any hassle.

WPS AP Site

Survey

Display the information of surrounding APs with WPS function from last scan

result. List information included SSID, BSSID, RSSI, Channel, Authentication,

Encryption, Version, and Status.

Refresh

Issue a rescan command to wireless NIC to update information on surrounding

wireless network.

Mode

Select from the pull-down menu to decide the station role-playing as an Enrollee

or an external Registrar.

Registrar: Add the AP’s PIN code into the PIN code column, and press the

device PIN button. It will connect with the AP in 2 minutes and get IP address.

Enrollee: Input the device’s PIN code into the PIN code column of AP. Start AP

WPS process and click device PIN button. Then, the device will connect to AP in

two minutes and get IP address.