User's Manual

42
Q
Q
o
o
S
S
WMM
Check the box to enable or disable the WMM function. (Default setting
is Enable.)
WMM Power Saving
Check the box to enable this function. (Default setting is disable.)
PS Mode
Select preferred power save mode, AC_BE, AC_BK, AC_VI, AC_VO.
Direct Link Setup
Check the box to enable Direct Link Setup (DLS) and enter the MAC
address in below column. This function will be enabled under the
connection with AP which must support the DLS function. Direct Link
Setup allows direct STA-to-STA frame transfer within a BSS (Basic
Service Set). This is designed for consumer use, where STA-to-STA
transfer is more commonly used.
Tear Down
Click the Tear Down button to disable the DLS function.