User's Manual

Wireless Distribution System (WDS)

WDS Mode

Select the mode from the pull-down menu, Disable, Lazy Mode, Bridge

Mode or Repeater Mode. (Default WDS mode is Disable.)

If the users would like to set up the WDS function, please go to Wireless

settings> Basic to set up APs that should use the same SSID and Channel ,

then go back to Wireless settings> WDS to enter Wireless MAC of each

other to make the WDS connection.

Step 1: Setup the same SSID and Channel on both wireless APs.

Step 2: Enter Wireless MAC address to each other(according to the

WDS mode that user selected).