User's Manual

28
z Hexadecimal (WEP 64 bits): 10 Hex characters (0~9, a~f).
z Hexadecimal (WEP 128 bits): 26 Hex characters (0~9, a~f).
z ASCII (WEP 64 bits): 5 ASCII characters (case-sensitive).
z ASCII (WEP 128 bits): 13 ASCII characters (case-sensitive).
WPA2, WPA2-PSK, WPA-PSK/WPA2-PSK, and WPA1 WPA2 offer
three encryption methods, TKIP, AES and TKIP AES.
WPA/ WAP2/ WPA1 WPA2
WPA Algorithms: Select the type of algorithm, TKIP or AES for
WPA, and TKIP, AES or TKIP AES for WPA2, WPA1/WPA2.
Key Renewal Interval: Enter the renewal security time (seconds) in
the column. Default is 3600 seconds. Set 0 to disable re-key.
RADIUS Server: RADIUS is an authentication, authorization and
accounting client-server protocol. The client is a Network Access
Server that desires to authenticate its links. The server is a server that
has access to a user database with authentication information.
IP Address: Enter the RADIUS Server’s IP Address provided by your
ISP.
Port: Enter the RADIUS Server’s port number provided by your ISP.
(The default is 1812.)
Shared Secret: Enter the password that the Wireless Portable Router
shares with the RADIUS Server.
Session Timeout: Session timeout interval is for 802.1x re-
authentication setting. Set to zero to disable 802.1x re-authentication
service for each session. Session timeout interval unit is second and
must be larger than 60.
Idle Timeout: Enter the idle timeout in the column.
PMK Cache Period: Only valid in WPA2 security
. Set WPA2 PMKID
cache timeout period, after time out, the cached key will be deleted.
PMK Cache Period unit is minute.
Pre-Authentication: Only valid in WPA2 security
. The most important
features beyond WPA to become standardized through 802.11i/WPA2
are: pre-authentication, which enables secure fast roaming without
noticeable signal latency.