User's Manual

L2TP Passthrough

L2TP, Layer Two Tunneling Protocol (L2TP). Use the L2TP with

VPN that user can access the personal network via Internet.

Select Enabled or Disabled from the pull-down menu.

IPSec Passthrough

IPSec, Internet Protocol Security. Select Enabled or Disabled from

the pull-down menu.

PPTP Passthrough

PPTP, Point-to-Point Tunneling Protocol. Select Enabled or Disabled

from the pull-down menu.

Advanced Routing (GW)

If you connect several routers with this Wireless Portable Router, you may need to set up a predefined

routing rule to have more effective network topology/traffic, this is called static route between those

routers and the Wireless Portable Router.

To set static routers, enter the settings including route IP address, route mask route gateway the

route Interface from LAN or WAN.