User's Manual

11
Step 2- LAN
This step can set up Wireless Portable Router’s IP address, subnet mask, DHCP type, DHCP IP
addresses range, DHCP subnet mask and DHCP lease time.
IP Address
Shows the IP address of the Wireless Portable Router (Default IP
address is 10.10.10.254.)
Subnet Mask
The subnet mask of the Wireless Portable Router (Default subnet mask
is 255.255.255.0.)
DHCP Type
Disable: Select to disable this Wireless Portable Router to distribute IP
addresses to connected clients.
Server: Select to enable this Wireless Portable Router to distribute IP
Addresses (DHCP Server) to connected clients. And the following field
will be activated for you to enter the starting IP Address.
DHCP Start IP
The starting address of this local IP network address pool. The pool is a
piece of continuous IP address segment. Keep the default value
10.10.10.100 should work for most cases.
DHCP End IP
The end IP address, the maximum is 253. Default value 253 should
work for most cases (10.10.10.253.) If “Start IP Address” is set at
10.10.10.100 and the “End IP address” is 10.10.10.253, the device will
distribute IP addresses from 10.10.10.100 to 10.10.10.253 to all the
computers in the network that request IP addresses from DHCP server
(Router).
DHCP Subnet Mask
The subnet mask of the distribute IP addresses clients, the subnet mask
must be set at the same segment as the Wireless Portable Router.
DHCP Lease Time
The lease time of the distribute IP Addresses. Default settings are 86400
seconds.