User Manual

-
36 -
 Auto Select Auto for the Network adapter to select the Preamble
type automatically depending on the Access Point Preamble
type.
 Long
Preamble
If in a "noisy" network environment, the Preamble Type
should be set to Long Preamble.

Short
Preamble
The Short Preamble is intended for applications where
minimum overhead and maximum performance is desired. If
in a "noisy" network environment, the performance would be
decreased.
RTS Threshold
This value should remain at its default setting of 2347.
Should you encounter inconsistent data flow, only minor
modifications of this value are recommended.
Select
SharedKey
Index
Select from
1, 2, 3, 4 or No selection.
Sharekey1
Sharekey2
Sharekey3
Sharekey4
This setting is the configuration key used in accessing the
wireless network via WEP encryption.
Fill in the appropriate value/phrase.
SSID
SSID is the unique name shared among all points in your
wireless network. It must be identical for all points in the
network. It is case-sensitive and must not exceed 32
characters. Make sure that all points in the network are set
the same.
WEP
WEP is a data privacy mechanism based on a 64 Bit/128 Bit
shared key algorithm.
Select WEP key 128bit or WEP key 64bit to enable WEP
encryption.
4. In
Wireless Network Connection Properties
window, select the
Wireless Networks
tab.