User Manual

-
8 -
Install the Device
Automatically
Once the Application setup in
Install the Utility
section has been
completed, follow below steps to install the device.
1. Before installing the device, make sure the computer is turned off.
2. Remove the expansion slot cover from the computer.
3. Carefully slide the wireless PCI card into an available PCI slot, push it
evenly and firmly and ensure it is screwed securely in place using the
mounting screw.
Once the device has been connected to your computer, Windows will
detect the new hardware and then automatically copy all of the files
needed for networking.
For Windows 98 users
: As you perform the installation, have your
system operating CD-ROM at hand. You may be asked to insert the OS
CD-ROM for the system to download a specific driver.
For Windows 2000 users
: When
Digital Signature Not Found
screen
appears, click
Yes
to continue.
For Windows XP users
:
1. Select
Install the software automatically (Recommeded)
and click
Next.
2. Click
Continue Anyway.
3. Click
Finish
to complete the installation.