User's Manual

4
Introduction
The WP102 is an IEEE802.11b compliant Access Point, which provides a powerful
high-speed wireless connection for compatible wireless-enabled devices into the network
with the freedom to roam. The WP102 provides 64/128 bit WEP encryption and
IEEE802.1x which ensures a high level of security to protects users’ data and privacy. The
MAC Address filter prevents the unauthorized MAC Addresses from accessing your
Wireless LAN. Your network security is therefore double assured. Plus, the web-based
management is easy to use that your wireless network connection is ensured to be always
solid and hassle free.
How to connect to the web server of AP
In order to configure the settings of AP, you have to connect to the web server of AP first.
(1) The default IP of AP is 192.168.1.254, in order to connect to the web server of AP
(a) connect PC to the AP through a UTP cable, the connection is like the following
graph.
Or, you can also connect to the AP by a wireless network card and follow the same
steps.
(b) set the IP of LAN card in PC to the same subnet as the IP of AP