User's Manual

- 16 -
Advanced
Wireless mode
Select wireless mode. 802.11B only, 802.11 B/G
mix, 802.11A only, 802.11 A/B/G mix and
802.11G only modes are supported.
B/G Protection
ERP protection mode of 802.11G definition. You
can choose one from the pull-down list, including
Auto, On and Off.
Tx Rate
Manually force the Transmit using selected rate.
Dafault is auto.
Tx BURST
Check to enable the Tx BURST mode.
Enable TCP Window Size
Check to enable TCP Window Size function.
Fast Roaming at Check to set the fast roaming at certain
transmitting power.
CCX2.0
Check to enable the CCX2.0 function.
Turn off RF
Click to disable the RF function.
Apply
Click to apply the current settings.
OK
Click to save and exit the current page.
About
Click on the About tab to view basic version information about the Configure
Version, Driver Version, EEPROM Version, Firmware Version.