Abocom Systems 802.11b/g Multi-function Wireless Access Point : User's Manual : Page 6

15 WL5470AP User’s Manual

WISP + Universal Mode

In this mode, the AP behaves virtually the same as the WISP mode, except one thing: the AP can also send

wireless signal to the LAN side. That means the AP can connect with the remote WISP AP and the indoor

wireless card, and then provide IP sharing capability all at the same time! However, the output power is

divided between 2 wireless sides and proper antenna installation can influence the performance greatly.

To set the operation mode to “WISP + Universal”, Please go to “Mode WISP + Universal

” and click the Setup button for configuration.