Installation Guide

- 31 -
Item Description
Tx Rate
It shows the current transfer rate. (1,
2, 5.5, or 11Mbps or Auto)
Int Roaming
It displays the current roaming
status. (Disabled or Enabled)
MAC
Address
It displays the MAC address of the
Wireless USB Adapter.
Status
It displays the information about the
status of the communication (the
BSSID of the Access Point to which
the card is associated).
Signal
Strength
It displays the signal strength of the
connection between the Wireless
USB Adapter and the Access Point it
connects.
Link Quality
It displays the link quality of the
connection between the Wireless
USB Adapter and the Access Point it
connects.
Change
Click Change to change the
configuration parameters such as
Operating Mode, SSID, Tx Rate,
and Int Roaming. (Refer to below
page)
Submit
Click Submit to save the changes.
Cancel
Click Cancel to ignore the previous
setting.