User's Manual

Chapter 2: Operation Modes
6
Chapter 2: Operation
Modes
This device provides operational applications with Router, AP and Client modes, which are mutually
exclusive. This device is shipped with configuration that is functional right out of the box. If you want
to change the settings in order to perform more advanced configuration or even change the mode of
operation, you can manually switch to the mode you desire by the manufacturer as described in the
following sections. The default setting mode is Router mode.
RouterW Mode
When set to Router mode, ensure you are using the wireless LAN interface, connect the Wireless
Router with computer via radio frequency. In this mode, the device is supposed to connect to internet
via ADSL/Cable Modem. Connect the ADSL modem to the Ethernet port of the Wireless Router by
Ethernet cable. After connected successfully, user can login the web page of the Wireless Router to set
up the Internet connection by using PPPoE, DHCP client, PPTP client , L2TP client or static IP.