User's Manual

Chapter 4: Web Configuration
46
Enable DMZ
Check the box to enable DMZ function. If the DMZ Host Function is
enabled, it means that you set up DMZ host at a particular computer to
be exposed to the Internet so that some applications/software, especially
Internet / online game can have two way connections.
DMZ Host IP
Address
Enter the IP address of a particular host in your LAN which will receive
all the packets originally going to the WAN port/Public IP address
above.
Note: You need to give your LAN PC clients a fixed/static IP address
for DMZ to work properly.
Apply Changes
After completing the settings on this page, click Apply Changes button
to save the settings.
Reset
Click Reset button to restore to default values.
VLAN
Enable VLAN
VLAN(Virtual Local Area Network) refers to a group of
logically networked devices on one or more LANs that are
configured so that they can communicate as if they were
attached to the same wire, when in fact they are located on
different LAN segments. Because VLANs are based on logical
instead of physical connections, it is very flexible for user/host
management.
Enable this function to setup the virtual local area network.