User's Manual

Chapter 4: Web Configuration
36
Refresh: Click this button to refresh the table.
Close: Click this button to close the window.
Static DHCP
Check the box to enable the Static DHCP function, default setting is disabled.
When set to enabled, user can click Set Static DHCP button to set the Static
DHCP function.
IP Address: Enter the fixed IP address that DHCP Server assigned to a
certain connected station.
MAC Address: Enter the MAC address of a certain station, and then the
DHCP Server will to distribute a fixed IP address to the station automatically
once they connected.
Comment: You can enter a comment to description above IP address or MAC
address.
Apply Changes: After completing the settings on this page, click Apply
changes button to save the settings.
Reset: Click Reset to restore to default values.
Static DHCP List: Here shows the static IP address that have been assigned
according to the MAC address.
Delete Selected: Click Delete Selected to delete items which are selected.
Delete All: Click Delete All button to delete all the items.
Reset: Click Reset button to rest.
Domain Name
Enter the network area name here.
802.1d
Spanning Tree
Select Disabled or Enabled form the pull-down list.
Clone MAC
Address
Your ISP may require a particular MAC address in order for you to connect to
the Internet. This MAC address is the PC’s MAC address that your ISP had
originally connected your Internet connection to. Type in the MAC address to
replace the WAN MAC address with the MAC address of that PC.