User's Manual

Chapter 4: Web Configuration
30
Enable WDS
Check the box to enable the WDS function.
MAC Address
MAC Address: Enter the Wireless BSSID (MAC) 12 characters of the
wireless AP that you want to connect with. To check your wireless router’s
MAC address, please go to Status > Wireless Configuration to find your
BSSID (Wireless MAC address.)
Data Rate
Select the data rate form the pull-down list.
Comment
Enter a description for the device.
Apply Changes
After completing the settings on this page, click Apply changes button to
save the settings.
Reset
Click Reset to restore to default values.
Set Security
Enable the WDS function and then click Set Security button to set up the
WDS security.
Encryption: Select the encryption type None, WEP 64 bits, WEP 128 bits,
and WPA2 from the pull-down menu.
WEP