User's Manual

Chapter 4: Web Configuration
29
Step 1. Users would like to set up the WDS function, please go to Wireless > Basic Settings page
to set up the Mode into WDS or AP+ WDS (Repeater) mode, and set the APs into the same
SSID (Network Name) and Channel Number(If set to WDS mode, the SSID do not need
to change). After setting up, please click Apply Changes button to execute.
Step 2. Then go back to Wireless > WDS Settings page to check Enable WDS box to enable WDS
function and then enter Wireless MAC address (please go to Management> Status>
Wireless Configuration> BSSID to make sure the BSSID) 12 characters to each other to
make the WDS connection. Please click Apply Changes button to execute.